China Four Screw and Two Stage Compression Frequency Conversion Air Compressor lowes air compressor

Merchandise Description

1. Substantial effectiveness and vitality saving screw principal machine

The principal motor adopts large rotor, reduced speed layout, including 2 independent compression models. The rotor adopts the most recent design of the rotor UV patent profile, soon after a lot more than twenty procedures of finishing, to make sure the precision, trustworthiness and performance of the rotor profile.

The first phase compression rotor and the 2nd stage compression rotor are merged in a housing and are right driven by helical gears respectively. So that each phase rotor can get the very best linear velocity, compression transfer effectiveness is the highest. The compression ratio of every single phase of compression is specifically designed to lessen bearing and gear hundreds and prolong the existence of the primary engine.

The patented oil lubrication program separates the oil supply of the compressor chamber and the bearing independently. The compressor chamber adopts regular clean lubricating oil and the bearing component adopts higher cleanse lubricating oil to make certain the large dependability of the bearing. The compression ratio of every stage is tiny, the leakage is scaled-down, and the volume performance is high. Under the very same power, the 2 heads bear the load, bearing tension is small, lengthier daily life.

two. The latest generation of substantial performance collection screw rotors

Direct coupling travel big rotor, low speed host

High effectiveness, lower noise, low vibration, large reliability to global very first-class stage

Substantial result bearing of cylindrical and angular make contact with ball bearings

Bearing daily life ≥100,000 several hours

Higher precision rotor is the promise of functionality and trustworthiness

three. Substantial top quality and higher efficiency motor

The motor configured by air compressor is commissioned to be made by specialist electrical equipment factory according to large-level demands. The frequency conversion motor and plateau motor are specifically taken care of locally. Each and every motor has been strictly analyzed just before leaving the manufacturing unit. The four-phase motor has the traits of reduced velocity and substantial dependability. The motor is geared up with hefty responsibility SKY imported bearings, equally finishes of the bearing housing, extra grease filling port, handy upkeep, fully displays the humanization of the design and style. IP55 security class, can efficiently stop dust and dampness into the motor, prolong the services existence of the motor.

four. Layout framework

The cooling and heating rooms are divided, and the warmth dissipation influence of the total equipment is far better, which guarantees that all components operate in the chilly room and prolong the daily life of the machine

Gained the national patent sensible layout, machinery, electrical integration, device in the discipline with out specific basis, dealing with, set up is extremely hassle-free. The place in the device is divided into very hot and chilly rooms, which do not impact every single other. The inside place of the air compressor is enhanced, and the scientific inner air circulation is made to make certain the full cooling of the parts and parts, and the provider life is prolonged.

In Buy TO Reduce the sounds OF the machine, the Removable enclosure with substantial quality flame retardant sound insulation sponge is created, so that you have much more adaptability when thinking about the placement of air compressor. Not only fulfill the requirements of environmental defense, and hassle-free machine cleaning

five. Oil and fuel separator main sinking set up construction

The aftercooler is assembled collectively with the gasoline-water separator, which omits the center connection line, will save room, avoids leakage, and lowers set up value. The circulation among the cooler and the gasoline-water separator is shorter, the gas circulation path is much more reasonable, and the fuel-drinking water separation performance is improved.
 

six. Interstage spray cooling design

Interstage lubricating oil stereoscopic injection shut to atomization. Large cooling efficiency, uniform lubrication, significantly reduce electricity usage. Preserve the intercooler, decrease the stress reduction, minimize the upkeep price.
 

seven. The blend of oil and exhaust valve is proper

Hold massive device gentle load commence, reduce the effect on the power grid, extend the lifestyle of the motor. It solves the dilemma of oil spitting and startup failure in low temperature atmosphere. This combination is simple in composition! Convenient connection, secure and reputable.

FAQ

Q: Are you trading company or company?
A: We are an business and trade built-in business, with its very own producing plant, and many factories in the identical market have strategic cooperative relations.

Q: How long is your supply time?
A: About 45-60 times soon after the deposit.

Q: What is your terms of payment?
A: thirty% T/T as deposit to validate the order 70% balance following the receipt tests prior to shipment.

Q: How to put in and adjust the equipment?
A: We supply on the internet CZPT /video clips/use handbook to support consumers and in some area we have engineer.

Q: How about the quality and value of your goods?
A: Our goods are based on top quality, price as a health supplement, in a realistic price tag for consumers to create or locate the most expense-powerful items, all based mostly on client demands, so that consumers acquire satisfactory products.

Q: How about following sales and service?
A: Our Firm pays unique attention to product good quality, and assures that all right after-income solution problems can be solved for customers in a timely method Because of TO OUR abundant Expert technological staff, we can remedy the after-product sales troubles of most products by ourselves with no waiting for the reply from other factories.

US $3,000-100,000
/ Piece
|
1 Piece

(Min. Order)

###

Lubrication Style: Lubricated
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Vertical
Structure Type: Closed Type
Installation Type: Stationary Type

###

Customization:
US $3,000-100,000
/ Piece
|
1 Piece

(Min. Order)

###

Lubrication Style: Lubricated
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Vertical
Structure Type: Closed Type
Installation Type: Stationary Type

###

Customization:

The Air Compressor Is a Versatile Tool

The Air Compressor is one of the most versatile tools in any garage or workshop. It is easy to use and can perform a variety of tasks, from jackhammering to drilling. These machines are available in a wide variety of sizes and types, making it an excellent choice for a variety of situations. With a single motor, you no longer need separate motors for each tool. Its lightweight, compact design makes it easy to handle, and the single motor also reduces wear on parts.
air-compressor

Oil-injected

Oil-injected air compressors require a large amount of lubricant, which needs to be added to the sump regularly to maintain optimum performance. As there are many types of industrial fluids, a well-intentioned maintenance technician may add the wrong lubricant to the compressor. If this happens, the compressor will become incompatible with the lubricant, resulting in excessive carryover and the need to flush and replace downstream air treatment components.
Typically, the G 110-250 oil-injected rotary screw compressor from Atlas Copco provides reliable compressed air, preventing costly downtime. The G110-250 oil-injected rotary screw compressor is highly reliable and durable, enabling it to function in temperatures up to 46degC/115degF. Despite the oil-injected air compressor’s robust design, this unit requires very little on-site installation, and it features simple operation.
The primary advantage of oil-injected air compressors is the reduced cost of running. The cost of oil-free compressors is less than half of that of oil-injected ones, and it will require fewer maintenance costs in the long run. Moreover, the oil-free system is more environmentally friendly than oil-injected air compressors. But the drawbacks of oil-injected air compressors are substantial, too. It can contaminate finished goods and cause a significant financial risk for the manufacturer.
An oil-injected rotary screw air compressor offers several advantages over its counterpart. First, it features an innovative vertical design with variable-speed drive, allowing it to run more efficiently. Second, oil-injected air compressors reduce energy consumption by up to 50% compared to non-oil-injected air compressors. They also have a thermostatic valve, allowing them to maintain an optimum temperature. Thermostatically-regulated oil coolers allow the compressor to run more quietly.

Oil-free

What is an oil-free air compressor? The name refers to a type of air compressor that does not contain oil in the compressor chamber. Oil-free air compressors still use oil for various purposes, including lubricating the moving parts and managing waste heat. However, many people do not realize that their air compressor still requires oil for proper functioning. This article will explore why this type of air compressor is preferable for many users.
First of all, oil-free air technology has many benefits. For one, it reduces the energy cost involved in filtering air, and it minimizes leaks. Moreover, it also reduces the oil costs associated with compressor refills. And finally, it reduces the risks of contamination. Oil-free air technology is the future of compressed air. If you’re looking for an oil-free air compressor, here’s what to look for in your search.
Depending on the purpose of your air compressor, it may be beneficial to invest in an oil-free air compressor. Oil-lubricated air compressors are generally more durable than their oil-free counterparts, but they may cost twice as much. You should still consider the cost of ownership before purchasing an oil-free compressor. The oil-free models can be easier to transport, and they are more powerful. Moreover, they’re quieter than oil-lubed models.
An oil-free air compressor also means less maintenance, as it doesn’t need oil to work. This type of air compressors also features fewer moving parts, which means fewer places for problems to develop. All oil-free air compressors are manufactured to meet ISO Class 0 and 1 air purity standards. They also have less noise and vibration compared to their oil-based counterparts. So, why not choose an oil-free air compressor for your business?
air-compressor

Gasoline

When choosing a gas-powered air compressor, it’s important to consider the advantages of gasoline. This energy source can power a large air compressor without electricity. However, this type of air compressor lacks electrical hookup, so you’ll need to run an extension cord if you need to use it at a distance. However, gas compressors are able to function with just a gas tank. This makes them ideal for medium to heavy-duty industrial applications.
Another important consideration when choosing a gas air compressor is its size. Larger compressors are typically larger than portable ones and require more space. This makes them easier to transport and operate on the go. However, if you’re not sure which type of air compressor is best for you, consider the gas-powered versions. While they may be lighter, they don’t run as smoothly as their electric counterparts. Gasoline-powered compressors are not as portable as their electric counterparts and require proper maintenance.

Electricity

Electricity in an air compressor is not cheap. A 25 HP air compressor runs for ten hours each day, five days a week. The motor in these machines consumes 746 watts per hour. To find out how much electricity the equipment uses, multiply the wattage by the running time. For example, if the compressor runs for three hours, then it will use 1.9 kilowatt hours of electricity. To determine how much electricity an air compressor uses per day, you can calculate the kilowatt hours and multiply the number by the utility rate. Considering this, you can determine the cost of running your air compressor once per month.
The cost of operating an air compressor depends on the type of compressor. Electric air compressors are often silent and can run without any maintenance. These tools can be left unattended for up to four thousand hours before requiring repair. Electric air compressors require higher power for higher pressure, so you should plan accordingly. Whether or not you need a maintenance visit is up to you, but the benefit of not having to spend a fortune on repairs is priceless.
Although compressed air is not an energy-efficient source, its use in a variety of applications may save you money and kilowatts. Since an air compressor uses power when it is running, the cost is lower than the cost of operating a power tool. If you plan to use your air compressor for a long time, make sure that it is maintained properly. Proper care will save you money and power, and you may even be able to get an extended warranty if the compressor breaks down.
air-compressor

Variable frequency drive

The main purpose of a variable frequency drive (VFD) in an air compressor is to reduce energy consumption in the process of compression. A single motor drag system cannot adjust its speed continuously according to the weight of the load. By applying frequency control to the compressor, the power consumption can be reduced while maintaining the same pressure level. Therefore, a VFD is an excellent choice for compressors. Its benefits are numerous.
A VFD can also monitor the temperature of the motor and send error signals if the motor is running too hot or too cold. This eliminates the need for a separate sensor to monitor the oil pressure. These functions are useful not only in lowering energy consumption, but also in improving the performance of an application. Moreover, a VFD can monitor additional variables such as temperature and motor speed. Hence, it is a useful investment.
When using a VFD, it is crucial to choose the right motor. The speed of the compressor should be within the maximum starting limit of the motor. The air tank may be of any size, but a constant pressure limit is required to keep the VFD running within the service factor of the motor. In addition to a VFD, a master controller should also include a remote pressure set point and a PID card for a master controller. The transmitter should incorporate all useful data from the VFD, including the speed and the oil temperature. The VFD must be tested before it is integrated with the master control. It should be tested for min and max speed, temperature, and current within the expected range.
The use of a VFD in an air compressor has many benefits. One of the most notable is the reduction in power consumption. Fixed-speed compressors run on set points of six to seven bar. An extra bar of compression uses 7 percent of energy. This energy is wasted. A VFD-powered air compressor can also increase the life span of compressor parts. It is one of the best investments in your compressor. So, why wait any longer?

China Four Screw and Two Stage Compression Frequency Conversion Air Compressor     lowes air compressorChina Four Screw and Two Stage Compression Frequency Conversion Air Compressor     lowes air compressor
editor by czh 2022-11-26

Natural gas screw compressor

As one of the natural gas screw compressor manufacturers, suppliers, and exporters of mechanical products, We offer natural gas screw compressor and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of natural gas screw compressor.

Recent Posts