China high quality Energy Saving Bmvf132 Permanent Magnet Industrial Screw Air Compressor lowes air compressor

Product Description

Product Description

Energy Saving BMVF132 Permanent Magnet Industrial Screw Air Compressor

Oil injected screw air compressor has become the mainstream of air compressor development in the world. It has extremely superior and reliable performance. It has small vibration, low noise, high efficiency and few vulnerable parts. It has incomparable performance advantages of piston compressor (under the same exhaust pressure). The precise coordination between the male and female rotors and between the rotor and the main engine shell reduces the back- flow leakage and improves the efficiency; Only the rotors are meshed with each other, and reciprocating motion without cylinder, which reduces the source of vibration and noise; The unique lubrication method brings many advantages:

1. With the pressure difference generated by itself, lubricating oil is continuously injected into the compression chamber and bearing to simplify the complex mechanical structure.
 

2. The injected lubricating oil can form oil film between the rotors, and the primary can take secondary rotor to rotate, Without the help of high precision synchronous gear.
 

3. The injected lubricating oil can increase the air tightness.
 

4. The lubricating oil absorbs a lot of compression heat, so even if the compression ratio reaches 16, The head can still be controlled below the carbon deposition and degradation temperature of general lubricating oil, There is no friction between the rotor and the outside of the machine due to different expansion coefficient.
 

5. Lubricating oil reduces the noise caused by high frequency compression.
 

6. A small amount of oil into the compressed air, pneumatic tools have a certain lubrication.
 

Product Parameters

Screw group

5: 6 Gear rotor

Compression method

Continuous, CHINAMFG

Compressed air outlet pressure

0.65-0.8MPa

Compressed air outlet temperature

Air-cooled

Compressed air outlet temperature

10ºC~15ºC higher than the ambient temperature

Volume of Lubricating Oil

About 52liters

Motor speed

N=2936r/min

Rated power

132kw

Air capacity

V=24m3/min

Weight

1860kg

Upper air temperature

45ºC

Lower limit of air temperature

0ºC

Fuel consumption

Exhaust oil content is less than 3PPM

Noise level

80dB(A)

Dimensions (length×width×height) (mm)

2700x1230x1730

Detailed Photos

Wider range of speed regulation, higher accuracy of regulation, wider range of air supply pressure and higher energy efficiency.

The patented design of weak magnetic control, pressure control and simple and stable permanent magnet motor open-loop control can adapt to a variety of adverse working conditions and make the system more stable.

  

The patented design of weak magnetic control, pressure control and simple and stable permanent magnet motor open-loop control can adapt to a variety of adverse working conditions and make the system more stable.

Motor and screw host coaxial, higher efficiency. The BMVF series is the CHINAMFG industry to achieve the screw host, synchronous motor, permanent magnet control electrical control synchronous design, and to achieve the advantages of cooperation.

Specification

Model

Working Pressure

Capacity

Motor Power

Connector

Weight

Noise

Dimension

  Bar

m³/min

kw

kg

dB(A)

mm

BMVF7.5G

0.65-1.0

1.0-1.25

7.5

G3/4

200

72

800*510*800

BMVF11G

0.65-1.0

1.5-1.85

11

G1

 

260

73

1000*670*1090

BMVF15G 0.65-1.0

2.05-2.35

15

280

73

1000*670*1090

BMVF22G

0.65-1.0

2.95-3.95

22

390

74

1200*800*1120

BMVF37G 0.65-1.0

5.05-6.35

37

600

76

1340*850*1300

BMVF45G

0.65-1.0

6.45-8.2

45

800

78

1480*1030*1365

BMVF55G 0.65-1.0

8.2-9.85

55

810

80

BMVF75 0.65-1.0

10.5-13.1

75

G2

1280

81

1800*1190*1710

BMVF90 0.65-1.0

12.5-15.5

90

1300

81

BMVF110 0.65-0.8

22

110

DN65

1850

82

2700*1230*1730

BMVF132 0.65-0.8

24

132

2270

82

Why Choose Us

      CHINAMFG group is a state-level large scale enterprise headquartered in HangZhou, ZHangZhoug province, China. Over the last 60 years CHINAMFG Group has grown to become a significant diversified engineering company developing high value machinery for industry worldwide. CHINAMFG group is the largest rock drill manufacturer in the world, and the largest air compressor manufacturer in China. Exports are shipped to over 25 countries .Today we produce over 30 000 rotary screw and 250 000 reciprocating compressors annually.By the year of 2014 our sales amount was close to RMB 2 billion. CHINAMFG group also has the high-quality customer service system.
      Our company is the authorized agent of CHINAMFG Group, specializing in air compressor, energy-saving transformation service and mining engineering construction machinery. We provide comprehensive technical support and after-sales service to customers.

      CHINAMFG is headquartered in HangZhou in ZHangZhoug, China. It has subsidiaries in ZheJiang , Chgonqing, ZheJiang , ZheJiang , Hong Kong, Seattle, San Diego, Orlando, Melbourne, Singapore, Jakarta, Leobersdorf, Budapest and Belgrade, as well as offices in Russia, Colombia, Brazil, Korea, Malaysia and Thailand.

 

      Advanced Equipment–Advanced equipment guarantees product quality. Over the years, we have received unanimous praise from overseas users for our integrity and high-quality product quality.

Packaging
      The air compressor is guaranteed for 1 year. In addition to wearing parts and consumables, if the spare parts within the warranty period are broken, the company provides free spare parts replacement, but the buyer needs to pay the freight. Please ask customer service for specific warranty rules.

FAQ
 
Contacts

ZHangZhoug Stars Energy Saving Technology Co., Ltd.

If you want to know more information, please contact us!

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: One Year Warranty
Warranty: One Year
Lubrication Style: Lubricated
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Horizontal
Samples:
US$ 10000/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

air compressor

What Is the Role of Oil in Lubricated Screw Compressors?

In lubricated screw compressors, oil plays a crucial role in ensuring optimal performance, reliability, and longevity of the compressor. Here’s a detailed explanation of the role of oil in lubricated screw compressors:

Lubrication: One of the primary functions of oil in screw compressors is to provide lubrication to the moving parts, particularly the screw rotors. The oil forms a thin film between the rotors and the compressor housing, reducing friction and wear. This lubrication minimizes mechanical losses and helps maintain efficient operation by reducing energy consumption.

Sealing: Oil also acts as a sealing medium in lubricated screw compressors. The oil film created between the rotors and the compressor housing helps create a seal, preventing air or gas leakage between the high-pressure and low-pressure sides of the compressor. This sealing action is crucial for maintaining the compressors’ efficiency and preventing losses in compression performance.

Cooling: Oil plays a vital role in cooling various components of the screw compressor. As the compressed air or gas is compressed, it generates heat. The oil absorbs a significant amount of this heat and carries it away from the compression chamber. The oil then circulates through the compressor’s oil cooling system, where it dissipates the heat to the surrounding environment or through an oil cooler. Efficient oil cooling helps prevent overheating of the compressor components, ensuring reliable operation and extending the compressor’s lifespan.

Cleaning: The oil in lubricated screw compressors acts as a cleaning agent. It carries away contaminants, such as dirt, dust, and metal particles, that may enter the compressor during operation. The oil passes through filters and separators, removing these impurities and preventing them from accumulating in the compressor’s internal components. Clean oil helps maintain the integrity of the compressor’s internal parts and reduces the risk of damage or malfunctions.

Sealing Element Lubrication: In some lubricated screw compressors, the oil also serves to lubricate the sealing elements, such as the shaft seals or labyrinth seals. Proper lubrication of these seals helps maintain their effectiveness in preventing oil leakage and maintaining the separation between the oil and the compressed air or gas.

Corrosion Protection: Oil in screw compressors often contains additives that provide corrosion protection to the internal components. These additives form a protective layer on the metal surfaces, preventing corrosion caused by moisture or contaminants present in the compressed air or gas. Corrosion prevention helps maintain the compressor’s performance, efficiency, and reliability over time.

It’s important to note that lubricated screw compressors require regular oil monitoring, oil analysis, and oil changes to ensure optimal performance. The oil level, quality, and viscosity should be regularly checked and maintained within the manufacturer’s recommended specifications.

In summary, oil in lubricated screw compressors serves crucial functions such as lubrication, sealing, cooling, cleaning, sealing element lubrication, and corrosion protection. These functions collectively contribute to the efficient and reliable operation of the compressor, extending its service life and minimizing maintenance requirements.

air compressor

What Is the Role of Air Dryers in Screw Compressor Systems?

Air dryers play a crucial role in screw compressor systems by removing moisture from the compressed air. Here’s a detailed explanation:

Air contains moisture in the form of water vapor, which can be problematic when compressed. As air is compressed, its temperature rises, causing the moisture to condense into liquid water. This moisture can cause various issues within the compressed air system, including equipment corrosion, decreased efficiency, and compromised air quality.

The role of air dryers in screw compressor systems is to remove this moisture from the compressed air, ensuring dry and clean air for reliable and efficient operation. Here are the key functions and benefits of air dryers:

1. Moisture Removal:

Air dryers extract moisture from the compressed air, reducing its dew point temperature. By lowering the dew point, the risk of condensation and subsequent issues, such as corrosion and water damage to pneumatic equipment, is minimized. Dry air is essential for maintaining the integrity and longevity of the system components.

2. Protection of Pneumatic Equipment:

Moisture in the compressed air can negatively impact pneumatic equipment, including valves, actuators, and air tools. It can cause rust, corrosion, and malfunctioning of these components. By using air dryers to remove moisture, the risk of damage to the equipment is significantly reduced, extending their lifespan and ensuring reliable performance.

3. Prevention of Contamination:

Moisture in compressed air can also lead to the growth of microorganisms, such as bacteria and fungi, within the system. These contaminants can contaminate the air and pose a health risk or cause product spoilage in sensitive applications, such as food and pharmaceutical industries. Air dryers help prevent the growth of these contaminants, ensuring clean and safe compressed air.

4. Enhanced Efficiency:

Dry compressed air improves the efficiency of the overall system. Moisture in the air can cause pressure drop issues, affecting the performance of pneumatic tools and equipment. Dry air allows for optimal operation, reducing energy consumption and enhancing system efficiency.

5. Reduced Maintenance and Downtime:

Moisture-related issues can lead to increased maintenance requirements and system downtime. By removing moisture with air dryers, the need for frequent maintenance and repairs caused by water-related problems is minimized. This helps in reducing costly downtime and improving productivity.

There are different types of air dryers commonly used in screw compressor systems:

a) Refrigerated Air Dryers: These dryers cool the compressed air, causing moisture to condense and separate from the air stream. The condensed water is then drained from the system, leaving behind dry air.

b) Desiccant Air Dryers: These dryers utilize desiccant materials, such as silica gel or activated alumina, to adsorb moisture from the compressed air. The desiccant material undergoes a regeneration process to remove the accumulated moisture, ensuring continuous drying of the compressed air.

c) Membrane Air Dryers: These dryers use permeable membranes to selectively remove moisture from the compressed air. The membranes allow water vapor to pass through while retaining dry air, effectively drying the compressed air stream.

The selection of the appropriate air dryer depends on factors such as the desired level of moisture removal, the specific application requirements, and the operating conditions of the screw compressor system.

In summary, air dryers play a vital role in screw compressor systems by removing moisture from the compressed air. They protect equipment, prevent contamination, enhance efficiency, and reduce maintenance and downtime. By ensuring dry and clean compressed air, air dryers contribute to the longevity, reliability, and optimal performance of the entire compressed air system.

air compressor

What Are the Advantages of Using a Screw Compressor?

Using a screw compressor offers several advantages in various applications. Here’s a detailed explanation:

High Efficiency:

Screw compressors are known for their high efficiency in converting electrical power into compressed air or gas. The rotary positive displacement design of screw compressors allows them to deliver a large volume of compressed air or gas with minimal energy loss. This high efficiency results in cost savings and reduced energy consumption compared to other types of compressors.

Continuous Operation:

One of the key advantages of screw compressors is their ability to provide a continuous flow of compressed air or gas. The interlocking helical rotors ensure a smooth and continuous compression process without pulsations. This feature is particularly beneficial in applications that require a steady and reliable source of compressed air, such as in manufacturing plants and industrial processes.

Compact Design:

Screw compressors are known for their compact design, which allows for space-saving installation. They have a relatively small footprint compared to other types of compressors, making them suitable for applications where space is limited. The compact design also facilitates ease of installation and integration into existing systems.

Low Vibration and Noise Levels:

Screw compressors are designed to operate with low vibration levels, resulting in smooth and quiet operation. The interlocking rotors and balanced design help in minimizing vibrations, reducing the need for additional vibration isolation measures. The low noise levels make screw compressors suitable for applications where noise reduction is important, such as in office environments or noise-sensitive industrial settings.

Wide Range of Capacities:

Screw compressors are available in a wide range of capacities, allowing for flexibility in meeting different compressed air or gas requirements. Whether it’s a small-scale application or a large industrial process, there are screw compressors available to match the specific capacity needs. This versatility makes screw compressors suitable for a variety of industries and applications.

Oil-Injected and Oil-Free Options:

Screw compressors are offered in both oil-injected and oil-free variants, providing options to meet different application requirements. Oil-injected screw compressors use lubricating oil for cooling, sealing, and reducing friction between the rotors. They are commonly used in industrial applications where a small amount of oil in the compressed air is acceptable. Oil-free screw compressors, on the other hand, eliminate the need for oil and provide contaminant-free compressed air. They are preferred in industries such as food and beverage, pharmaceuticals, and electronics, where oil-free air is critical.

Overall, using a screw compressor offers advantages such as high efficiency, continuous operation, compact design, low vibration and noise levels, capacity flexibility, and options for oil-injected or oil-free operation. These benefits make screw compressors a popular choice in various industries for a wide range of applications.

China high quality Energy Saving Bmvf132 Permanent Magnet Industrial Screw Air Compressor   lowes air compressorChina high quality Energy Saving Bmvf132 Permanent Magnet Industrial Screw Air Compressor   lowes air compressor
editor by CX 2024-05-08

Natural gas screw compressor

As one of the natural gas screw compressor manufacturers, suppliers, and exporters of mechanical products, We offer natural gas screw compressor and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of natural gas screw compressor.

Recent Posts