China Good quality Screw Stationary Air Compressor Diesel Driven Mobile Screw Air Compressor for Sale air compressor for sale

Product Description

This series primarily used with construction and mining ,bolting rig, various hand held drill machines, drifters, blasting equipment and various air source requirement.

Product Description

Brand Name:Sanrock

Product name: screw air compressor

Model Number:QSDS1100LG-25C

Emission standard:Stage III

Fuel tank capacity :650L

Exhaust port specifications * Quantity:G2*1 & G3/4*1

Air end:two stage compression

Working condition:three-condition

Max. working/ idle speed:1900/1400rpm

Motor power:294kw

Diesel Engine Brand:Yuchai

Working pressure:25bar

Capacity:31m3/min

Lubricating capacity:110L

Application:water well drilling,mining rock blasting,hole drilling

Demensions (L*W*H):3800x1800x2050mm

Weight:4800kg

Certification:CE

Feature:
1. Full series product optimized for stronger frame and better towing protection and safety; stronger roof loading capabilities to meet customer load carry needs with rubber protection strips.
2. All pressure pipes are connected with steel tubes, it has excellent sealing and protect rubber from prevent aging, abrasion resistance and has attractive appearance.
3. Designed safety air filter unit and stainless steel air inlet pipes for guaranteed dust filter ability and better protection against dirty air due to rubber horse damage.
4. All new designed cooler with independent modular unit and secured by structural component with cushion pad without any pressure points, effectively eliminating cooler damage by shroud deformation; independent damage unit placement made easy without removing the cooler assembly.
5. New designed protected cooler for higher efficiency and better safety protection. Full body sound absorbent cotton and rear car silencer designed to make operate noise reduce 40% less than normal products.
 6.Large stand-alone capacity, no clearance volume, reasonable structure and ideal force balance, long life of the host, easy maintenance and few wearing parts.

Feature:
1. Full series product optimized for stronger frame and better towing protection and safety;  stronger roof loading capabilities to meet customer load carry needs with rubber protection strips. 
2.  All pressure pipes are connected with steel tubes, it has excellent sealing and protect rubber from prevent aging, abrasion resistance and has attractive appearance. 
3.  Designed safety air filter unit and stainless steel air inlet pipes for guaranteed dust filter ability and better protection against dirty air due to rubber horse damage. 
4. All new designed cooler with independent modular unit and secured by structural component with cushion pad without any pressure points, effectively eliminating cooler damage by shroud deformation;  independent damage unit placement made easy without removing the cooler assembly. 
5. New designed protected cooler for higher efficiency and better safety protection.  Full body sound absorbent cotton and rear car silencer designed to make operate noise reduce 40% less than normal products.
6.Large stand-alone capacity, no clearance volume, reasonable structure and ideal force balance, long life of the host, easy maintenance and few wearing parts.

Company Profile

Certifications

 

Packaging & Shipping

 

FAQ

1.what can you buy from us?
DTH drilling rig,core drilling rig,highway pile driver,solar pile driver ,anchor pile driver
,rotary drill rig ,underground jumbo drill rig ,screw air compressor,DTH hammer,drill rod,
piston air compressor,pneumatic rock drill ,drill bit,tricone bit ,spare parts.

2.How can I make payment?
A:You can pay by credit card, TT, Western Union, LC etc.

3. How is the shipment? How long dose it take?
A: For large quantity or heavy products, we ship by sea shipping or land shipping. Shipping efficiency depends on country and city you want to ship to. For small and delicate products, we ship by DHL, UPS, Fedex or TNT.You can also appoint shipping method you like before we ship.

4.How is your quality control?
A: We have our own experienced QC.There will be strict inspection and testing for every order before shipping out.

 

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Online Technical Services
Warranty: 1 Year
Lubrication Style: Lubricated
Cooling System: Air Cooling/Water Cooling
Power Source: Diesel Engine
Cylinder Position: Vertical

air compressor

Are There Portable Screw Compressors Available?

Yes, portable screw compressors are available in the market to cater to various applications that require mobility and flexibility. Here’s a detailed explanation:

Portable screw compressors are compact and designed for easy transportation, allowing them to be used in different locations as needed. They offer the advantage of providing compressed air or gas on-site without the need for a fixed installation.

These compressors are typically designed with features that make them suitable for portable applications. Some key characteristics of portable screw compressors include:

  • 1. Compact and Lightweight Design: Portable screw compressors are designed to be lightweight and compact, making them easy to transport and maneuver. They are often mounted on wheels or skids for enhanced mobility.
  • 2. Durability and Robustness: Portable compressors are built to withstand the rigors of transportation and on-site use. They are constructed with sturdy materials and reinforced components to ensure durability in various working environments.
  • 3. Engine-Powered: Many portable screw compressors are powered by internal combustion engines, such as gasoline or diesel. This eliminates the need for a fixed power source, allowing them to be used in remote locations or areas without access to electricity.
  • 4. Integrated Controls and Safety Features: Portable compressors are equipped with user-friendly controls and safety features for easy operation and protection. These may include start/stop controls, pressure regulation systems, temperature monitoring, and safety shutdown mechanisms.
  • 5. Noise and Vibration Reduction: Portable screw compressors often incorporate noise and vibration reduction technologies to minimize their operational noise levels and vibrations. This helps maintain a comfortable and safe working environment.
  • 6. Versatility in Application: Portable screw compressors are designed to accommodate a wide range of applications. They can be used for construction projects, road repairs, mining operations, oil and gas exploration, emergency air supply, and other portable compressed air or gas requirements.

The capacity and performance of portable screw compressors can vary, ranging from smaller units suitable for light-duty tasks to larger compressors capable of delivering higher volumes and pressures for heavy-duty applications.

When selecting a portable screw compressor, it’s important to consider factors such as the required air or gas flow rate, operating pressure, power source availability, environmental conditions, and specific application needs. Consulting with manufacturers or suppliers can help in choosing the most suitable portable screw compressor for a particular use case.

air compressor

What Is the Impact of Ambient Temperature on Screw Compressor Performance?

Ambient temperature has a significant impact on the performance of screw compressors. Here’s a detailed explanation:

Screw compressors, like other types of compressors, rely on the surrounding environment to dissipate heat and maintain optimal operating conditions. The ambient temperature directly affects the compressor’s efficiency, capacity, power consumption, and overall performance.

Here are the key ways in which ambient temperature influences screw compressor performance:

1. Cooling Efficiency:

The cooling efficiency of a screw compressor is affected by the temperature difference between the compressed gas and the ambient air. As the ambient temperature increases, the temperature difference decreases, making it more challenging to transfer heat effectively. This can lead to higher discharge temperatures and reduced cooling efficiency, potentially impacting the compressor’s overall capacity and performance.

2. Capacity and Power Consumption:

Higher ambient temperatures can decrease the capacity of a screw compressor. Compressors are typically designed and rated based on specific operating conditions, including a defined ambient temperature range. When the ambient temperature exceeds the design limits, the compressor may experience reduced volumetric efficiency, resulting in a decrease in its overall capacity. Additionally, the compressor may require more power to maintain the desired pressure levels, leading to increased power consumption.

3. Heat Recovery:

In some applications, screw compressors are equipped with heat recovery systems to utilize the waste heat generated during compression. The effectiveness of heat recovery is influenced by the ambient temperature. Higher ambient temperatures can reduce the temperature differential available for heat exchange, limiting the potential for heat recovery and decreasing the overall system efficiency.

4. Lubrication and Cooling:

Screw compressors rely on lubrication systems to reduce friction and prevent wear between moving parts. The ambient temperature affects the performance of the lubricant. In high ambient temperatures, the lubricant may experience decreased viscosity, potentially leading to inadequate lubrication and increased wear on compressor components. Similarly, the cooling system of the compressor, including fans and heat exchangers, may be less effective in higher ambient temperatures, impacting the compressor’s ability to dissipate heat.

5. Operating Envelope:

Screw compressors have specified operating envelopes, which define the acceptable range of operating conditions, including ambient temperature. Operating the compressor outside its designed ambient temperature range can result in reduced reliability, increased maintenance requirements, and potential system failures. It is crucial to adhere to the manufacturer’s guidelines and ensure that the compressor operates within the recommended ambient temperature limits.

6. Control and Protection:

Modern screw compressors often feature advanced control and protection systems that monitor various parameters, including ambient temperature. These systems may adjust compressor operation, such as modulation of capacity or cooling strategies, to optimize performance and protect the compressor from operating outside safe limits. Understanding the impact of ambient temperature allows for appropriate adjustments and settings to maintain reliable and efficient compressor operation.

It’s important to note that different compressor models and manufacturers may have specific performance characteristics and operating limits. Therefore, consulting the manufacturer’s documentation and guidelines for the particular screw compressor in use is essential.

In summary, ambient temperature significantly affects the performance of screw compressors. Higher ambient temperatures can reduce cooling efficiency, decrease compressor capacity, increase power consumption, and impact lubrication and cooling systems. Adhering to recommended operating conditions and considering ambient temperature limitations are crucial for ensuring optimal performance, reliability, and longevity of screw compressors.

air compressor

What Is a Screw Compressor?

A screw compressor is a type of positive displacement compressor that operates based on the principle of rotary motion. Here’s a detailed explanation:

Working Principle:

A screw compressor consists of two helical rotors, typically called male and female rotors, that rotate in opposite directions within a housing. The rotors have specially designed profiles that interlock with each other, creating a series of compression chambers as they rotate. As the rotors rotate, the volume of these chambers decreases, compressing the air or gas trapped inside.

Compression Process:

As the air or gas enters the screw compressor, it gets trapped between the rotors’ lobes or threads. As the rotors continue to rotate, the trapped air or gas is carried along the length of the rotors and gradually compressed. The compression occurs continuously and smoothly as the air or gas moves from the suction side to the discharge side of the compressor. The interlocking rotors ensure a continuous flow of compressed air or gas without pulsation.

Oil-Injected and Oil-Free Variants:

Screw compressors are available in both oil-injected and oil-free variants. In oil-injected screw compressors, a small amount of lubricating oil is injected into the compression chamber to provide lubrication, cooling, and sealing between the rotors. The oil also helps in reducing friction and minimizing wear. Oil-injected screw compressors are commonly used in various industrial applications where a small amount of oil in the compressed air is acceptable.

On the other hand, oil-free screw compressors are designed to operate without the need for oil lubrication. These compressors use specialized rotor coatings, such as PTFE (polytetrafluoroethylene) or other non-stick materials, to reduce friction and prevent the need for oil. Oil-free screw compressors are often favored in applications where oil-free and contaminant-free compressed air is essential, such as in food and beverage, pharmaceutical, and electronics industries.

Applications:

Screw compressors are widely used in various industries for a range of applications. They are commonly employed in manufacturing plants, refineries, power generation facilities, and other industrial settings to supply compressed air or gas for pneumatic tools, process equipment, air conditioning systems, and more. The ability of screw compressors to deliver a continuous flow of compressed air or gas makes them suitable for applications that require a steady and reliable source of compressed air.

Advantages:

Screw compressors offer several advantages compared to other types of compressors. They provide high efficiency and can deliver a large volume of compressed air or gas. The continuous compression process results in smooth operation with minimal pulsation. Additionally, screw compressors are known for their compact design, low vibration levels, and relatively quiet operation.

In summary, a screw compressor is a rotary positive displacement compressor that uses interlocking helical rotors to compress air or gas. It operates based on a continuous compression process and is available in both oil-injected and oil-free variants. Screw compressors find widespread use in various industries for applications that require a reliable source of compressed air or gas.

China Good quality Screw Stationary Air Compressor Diesel Driven Mobile Screw Air Compressor for Sale   air compressor for saleChina Good quality Screw Stationary Air Compressor Diesel Driven Mobile Screw Air Compressor for Sale   air compressor for sale
editor by CX 2024-04-27

Natural gas screw compressor

As one of the natural gas screw compressor manufacturers, suppliers, and exporters of mechanical products, We offer natural gas screw compressor and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of natural gas screw compressor.

Recent Posts