China manufacturer 15HP Air Compressor China OEM Energy Saving Rotary Compressor Portable Type Direct Air Compressor CHINAMFG Made in China air compressor repair near me

Product Description

Product Description
HS series compressors are designed in accordance with the subtropical high temperature and high humidity working environment, and the optimized cooling design ensures that the unit can operate normally in a high temperature environment of 46°C.

Product Feature
1. Adhering to the concept of pursuing high-quality products, HS series compressors are designed in accordance with the subtropical high temperature and high humidity working environment, and the optimized cooling design ensures that the unit can operate continuously and normally in a high temperature environment of 46 °C.

2. Adopt the world-renowned CHINAMFG main motor. The protection grade is IP55. The insulation grade is F grade 100.

 

3. The gas circuit adopts the stainless steel pipe design of the American SAE standard, with low resistance and strong corrosion resistance, which completely eliminates the common problems of oil leakage, air leakage and air leakage under high pressure.

4. The patented synchronous two-stage compression technology is adopted, so that the compression ratio of each stage of the screw host is less than 6, which is lower than that of the ordinary screw air compressor, which ensures the service life of the screw host.

5. Each stage of the screw host has an independent oil cooling system and an automatic water removal system to ensure that the screw host can run stably around the clock.

6. The powerful third-generation e-Control controller has 6 operation monitoring points to comprehensively monitor the working conditions of the main engine, air filter, oil filter, oil separator, cooler and other important components, so that the compressor can run stably.
 

Specification
 

Mode HSV75A (W)-40 HSV90A (W)-40 HSV110A (W)-40 HSV132A (W)-40
Operating Pressure    Bar (g) 40 40 40 40
Motor speed (kw) 75 90 110 132
Exhaust volume (m³/min) 5.5 7.2 9.0 10.0
Cooling method water cooling water cooling water cooling water cooling
Noise dB(A) 72(75) 74(78) 74(78) 74(78)
Length 2550 3150 3150 3150
Width 1480 1880 1880 1880
Height 1850 1850 1850 1850
         
Mode HSV75A (W)-35 HSV110A (W)-30 HSV55A-25 HSV90A-25
Operating Pressure Bar(g) 35 30 25 25
Motor speed (kw) 75 110 55 90
Exhaust volume (m³/min) 7.6 11.0 5.4 9.5
Cooling method air cooling (water cooling ) air cooling(water cooling ) 74(78) air cooling
Noise dB(A) 72(75) 74(78) 72(75) 74(78)
Length 2550 3150 2550 3150
Width 1480 1880 1480 1880
Height 1850 1850 1850 1850
         
Mode HSV180A-25 HSV110A (W)-20    
Operating Pressure Ba(g) 25 20    
Motor speed (kw) 180 110    
Exhaust volume (m³/min) 19.0 12.5    
Cooling method air cooling(water cooling ) air cooling(water cooling )    
Noise dB(A) 78(82) 74(78)    
Length 3980 3150    
Width 1980 1880    
Height 1980 1850    

 

After-sales Service: Online
Warranty: 3000hours
Lubrication Style: Lubricated
Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

air compressor

Are There Oil-Free Screw Compressors Available?

Yes, oil-free screw compressors are available in the market to cater to applications where oil contamination is a concern. Here’s a detailed explanation:

Oil-free screw compressors, as the name suggests, are designed to operate without the use of lubricating oil in the compression chamber. These compressors offer several advantages in industries where oil-free compressed air or gas is required, such as in food and beverage, pharmaceutical, electronics, and certain manufacturing processes.

The key features and considerations of oil-free screw compressors include:

  • 1. Specialized Design: Oil-free screw compressors are designed with specialized materials, coatings, and sealing systems to eliminate the need for lubricating oil in the compression process. The rotors and other internal components are constructed to ensure minimal friction and wear, even in the absence of oil.
  • 2. Dry Compression: Unlike lubricated screw compressors, oil-free screw compressors rely on dry compression methods. The compression chamber is designed to achieve compression without the presence of oil, ensuring that the discharged air or gas is free from oil contaminants. This is particularly critical in industries where oil contamination can have detrimental effects on product quality or equipment performance.
  • 3. Sealing Technology: Oil-free screw compressors employ advanced sealing technologies to prevent air or gas leakage between the high-pressure and low-pressure sides of the compressor. These sealing systems ensure efficient compression while maintaining the required clearances between the rotors and the compressor housing.
  • 4. Cooling Systems: Oil-free screw compressors utilize alternative cooling methods, such as air or water cooling, to dissipate the heat generated during compression. Efficient cooling is crucial to prevent overheating and ensure reliable operation.
  • 5. Filtration Systems: Oil-free compressors often incorporate high-quality filtration systems to remove particulates, moisture, and other contaminants from the incoming air or gas. These filtration systems help maintain the integrity of the compressor and ensure the delivery of clean, oil-free compressed air or gas.
  • 6. Application-Specific Solutions: Oil-free screw compressors are available in various sizes and configurations to meet specific application requirements. They can be tailored to deliver the desired air or gas flow rates, pressures, and purity levels.

It’s important to note that oil-free screw compressors generally have higher initial costs compared to lubricated compressors due to their specialized design and materials. However, they offer benefits such as reduced maintenance, minimized risk of oil contamination, and compliance with stringent industry standards or regulations.

When considering an oil-free screw compressor, it’s crucial to assess the specific application needs, air quality requirements, and operating conditions. Consulting with manufacturers or suppliers can help in selecting the most suitable oil-free screw compressor for a particular industry or process.

In summary, oil-free screw compressors are available and offer a reliable and efficient solution for applications where oil-free compressed air or gas is essential. These compressors are designed with specialized features to ensure dry compression, reliable sealing, effective cooling, and high-quality filtration.

air compressor

How Do Screw Compressors Contribute to Energy Savings?

Screw compressors offer several features and advantages that contribute to energy savings. Here’s a detailed explanation:

1. Efficient Compression Process:

Screw compressors are known for their efficiency in compressing air or gas. They use a unique rotary screw design, where two intermeshing screws rotate to compress the air. This design provides continuous and smooth compression, resulting in less energy loss compared to other compression technologies, such as reciprocating compressors. The efficient compression process of screw compressors helps reduce energy consumption.

2. Load and Unload Operation:

Screw compressors often incorporate load and unload operation, also known as capacity control. This feature allows the compressor to match its output to the actual demand for compressed air. During periods of lower demand, the compressor unloads by disengaging some of its capacity. This reduces power consumption since the compressor is not operating at full load continuously. By adjusting the compressor’s output to match the required air flow, load and unload operation helps save energy.

3. Variable Speed Drive (VSD) Technology:

Many screw compressors are equipped with Variable Speed Drive (VSD) technology. A VSD allows the compressor’s motor speed to be adjusted according to the demand for compressed air. By running the compressor at lower speeds during periods of lower demand, the energy consumption can be significantly reduced. The VSD technology enables precise control over the compressor’s output, resulting in energy savings and improved efficiency.

4. Air Leakage Reduction:

A common source of energy loss in compressed air systems is air leakage. Screw compressors are designed to minimize air leakage through improved sealing mechanisms and enhanced construction materials. By reducing air leakage, the compressor can operate more efficiently, as less energy is wasted in compressing air that escapes before reaching the intended point of use. Regular maintenance and monitoring practices help identify and address air leakage issues, further contributing to energy savings.

5. Integrated Energy Recovery:

In certain applications, screw compressors can be configured to recover and utilize the heat generated during the compression process. This recovered heat can be used for various purposes, such as space heating, preheating process air or water, or powering other thermal processes. By utilizing the recovered heat energy, screw compressors enhance overall energy efficiency and reduce the need for additional heating systems.

6. System Optimization and Controls:

Screw compressors often feature advanced control systems that optimize their operation for energy efficiency. These control systems monitor various parameters, such as system pressure, air demand, and temperature, and adjust the compressor’s operation accordingly. By continuously analyzing the system requirements and making intelligent adjustments, the control systems help minimize energy waste and maintain optimal performance.

7. Maintenance and Proper Operation:

Regular maintenance and proper operation of screw compressors are essential for maximizing energy savings. Routine maintenance activities, such as cleaning air filters, checking lubrication levels, and inspecting and repairing leaks, ensure the compressor operates at peak efficiency. Additionally, proper operation practices, such as avoiding excessive idling or overloading, contribute to energy savings and prolong the compressor’s lifespan.

In summary, screw compressors contribute to energy savings through their efficient compression process, load and unload operation, variable speed drive technology, air leakage reduction, integrated energy recovery, system optimization, and proper maintenance and operation. By utilizing these features and implementing energy-conscious practices, industries can significantly reduce energy consumption and lower operating costs in compressed air systems.

air compressor

Can Screw Compressors Be Used in Industrial Applications?

Yes, screw compressors are widely used in industrial applications and are well-suited for various industrial processes. Here’s a detailed explanation:

1. Manufacturing and Assembly:

Screw compressors find extensive use in manufacturing and assembly processes. They provide a reliable source of compressed air for powering pneumatic tools, such as drills, impact wrenches, and spray guns. Compressed air is also used for operating pneumatic cylinders and valves, facilitating automation and control in industrial production lines.

2. Industrial Automation:

In industrial automation systems, screw compressors play a crucial role in providing compressed air for actuating control valves, operating robotic arms, and powering pneumatic actuators. The continuous and reliable supply of compressed air from screw compressors ensures the smooth operation of automated machinery and equipment.

3. HVAC Systems:

Screw compressors are commonly used in large-scale heating, ventilation, and air conditioning (HVAC) systems. They are employed in chillers, which cool water or air for air conditioning and refrigeration purposes. Screw compressors in HVAC systems offer high energy efficiency, making them cost-effective and environmentally friendly options for large commercial and industrial buildings.

4. Food and Beverage Industry:

The food and beverage industry relies on screw compressors for various applications. They are used for providing compressed air in food processing and packaging operations, such as pneumatic conveying, filling, labeling, and sealing. Screw compressors used in this industry are often of the oil-free type to ensure air purity and prevent contamination of food products.

5. Pharmaceuticals and Healthcare:

In the pharmaceutical and healthcare sectors, screw compressors are vital for critical applications. They provide clean and oil-free compressed air required for pharmaceutical manufacturing processes, including tablet coating, fermentation, lyophilization, and cleanroom operations. Screw compressors with strict air quality standards, such as oil-free and contaminant-free options, are commonly used in these industries.

6. Energy and Power Generation:

Screw compressors play a significant role in energy and power generation facilities. They are used for processes such as gas compression, pneumatic conveying of coal and biomass, and control air supply in power plants. Screw compressors in these applications are designed to handle high pressures and large volumes of gas.

7. Mining and Construction:

In mining and construction industries, screw compressors are employed for various tasks. They power pneumatic tools and equipment used in drilling, rock blasting, material handling, and construction activities. Screw compressors are valued for their reliability, continuous operation, and ability to withstand harsh operating conditions.

8. Oil and Gas Industry:

The oil and gas industry extensively uses screw compressors for gas compression and processing. Screw compressors are employed in natural gas pipelines, gas processing plants, and refineries. They handle the compression of gases, such as natural gas, hydrogen, and process gases, ensuring efficient transportation and refining operations.

These are just a few examples of the industrial applications where screw compressors are commonly used. Their high efficiency, continuous operation, compact design, and capacity flexibility make them well-suited for a wide range of industrial processes and systems.

China manufacturer 15HP Air Compressor China OEM Energy Saving Rotary Compressor Portable Type Direct Air Compressor CHINAMFG Made in China   air compressor repair near meChina manufacturer 15HP Air Compressor China OEM Energy Saving Rotary Compressor Portable Type Direct Air Compressor CHINAMFG Made in China   air compressor repair near me
editor by CX 2023-10-31

Natural gas screw compressor

As one of the natural gas screw compressor manufacturers, suppliers, and exporters of mechanical products, We offer natural gas screw compressor and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of natural gas screw compressor.

Recent Posts